aluminum electrolytic capacitors sa series 7mml, for general purposes standard miniature series with 7mm height. compliant to the rohs directive (2002/95/ec). sr series 7mml, high cv higher cv series with 7mm height. specifications category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tangent of loss angle (tan ) stability at low temperature endurance shelf life marking sa series sr series item ?40 to +85?c ?0 to + 85?c 6.3 to 50v 4 to 50v 0.1 to 220 f 0.1 to 470 f 20% at 120hz, 20?c after 2 minutes' application of rated voltage, leakage current is not more than 0.01cv or 3 ( a), whichever is greater. printed with white color letter on black sleeve. measurement frequency : 120hz at 20 ?c measurement frequency : 120hz the specifications listed at right shall be met when the capacitors are restored to 20 ? after the rated voltage is applied for 2000 hours at 85 ?. after storing the capacitors under no load at 85?c for 1000 hours and then performing voltage treatment based on jis c 5101-4 clause 4.1 at 20?, they shall meet the specified values for the endurance characteristics listed above. rated voltage ( v) tan (max.) 50 0.10 35 0.12 25 0.14 16 0.16 10 0.20 6.3 0.24 4 0.35 z 25?c / z + 20?c z 40?c / z + 20?c rated voltage ( v) impedance ratio zt / z20 (max.) 50 2 3 35 2 3 25 2 4 16 2 4 10 3 6 6.3 4 8 4 6 12 sa sr bi-polarized sp smaller high temperature capacitance change leakage current tan within 20 % of the initial capacitance value less than or equal to the initial specified value 200 % or less than the initial specified value smaller (sr series) st l +1max 15 min 4 min d +0.5max p 0.5 d d p d 4 1.5 0.45 5 2.0 0.45 6.3 2.5 0.45 8 3.5 0.5 sleeve ( p. e . t. ) (mm) u 1 s 2 a 3 1 4 a 5 3 6 3 7 0 8 m 9 d 10 d 11 configuration capacitance tolerance ( 20%) rated capacitance (33 f) rated voltage (10v) series name type d 4 to 8 pb-free leadwire pb-free pet sleeve dd configuration radial lead type type numbering system (example : sa series : 10v 33f) coefficient frequency 50 hz 120 hz 300 hz 1 khz 10 khz or more 0.70 1.00 1.17 1.36 1.50 4 7 33 4 7 39 5 7 65 6.3 7 110 8 7 165 8 7 240 dimensions 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 0r1 r22 r33 r47 010 2r2 3r3 4r7 100 220 330 470 101 221 331 471 v(code) code cap.( f) 4 7 1.0 4 7 2.3 4 7 3.5 4 7 5.0 4 7 10 4 7 19 4 7 24 4 7 28 5 7 38 6.3 7 58 8 7 75 4 7 1.0 4 7 2.3 4 7 3.5 4 7 5.0 4 7 10 4 7 19 4 7 24 5 7 29 6.3 7 44 8 7 65 4 7 24 4 7 31 5 7 52 6.3 7 65 8 7 85 4 7 24 5 7 36 6.3 7 57 8 7 72 4 7 28 5 7 48 5 7 58 6.3 7 71 8 7 115 5 7 33 6.3 7 51 6.3 7 63 8 7 78 4 7 28 4 7 39 5 7 55 5 7 65 6.3 7 98 8 7 150 4 7 28 5 7 44 6.3 7 57 6.3 7 68 8 7 107 4 7 35 4 7 43 5 7 59 6.3 7 87 8 7 145 5 7 38 5 7 47 6.3 7 59 8 7 96 4 7 34 4 7 40 4 7 48 5 7 78 6.3 7 120 8 7 180 4 7 34 5 7 42 5 7 50 6.3 7 77 8 7 130 50 (1h) sr sa case size d l (mm) rated ripple current (marms) at 85 ?c 120hz series 35 (1v) sr sa 25 (1e) sr sa 16 (1c) sr sa 10 (1a) sr sa 6.3 (0j) 4 (0g) sr sr sa rated ripple please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. frequency coefficient of rated ripple current cat.8100b
|
